ACCUMULATORS, INC.
Top and bottom loading bladder accumulators rated to 6,000 psi.

C-H PRODUCTS
Directional control valves. Manual, electric, cable operators.

DAMAN
Hydraulic valve manifolds, cover plates, valve adaptors and subplates.

D.M.I.C.
Reservoir accessories; SAE port flanges; Gauges and high pressure ball valves.

DURST
Engine and front mount pump drives; Single multiple, and direct drive to 950 horsepower.

ESKRIDGE, INC
Planetary spindle or sharft gearbox; Final drives, rated to 1 Million inch lb. of torque and multiple disc brakes.

GEARTEK
Hydraulic gear pumps and motors, displacements up to 18.91 cu. inches, pressure ratings up to 4,000 psi.

MAGNALOY
Flexible shaft couplings; Pump-to-motor mounting adaptors, hydraulic valve manifolds; Cover plates, adaptors, and subplates.

MARVEL FILTERS
Hydraulic sump strainers; In-line filters for low and high pressure applications

MICO, INC.
SAE mount multiple and caliper disc brakes; Brake valves and brake related accessories.

MICROMATIC-TEXTRON
Hyd-ro-ac & Rotac rotary actuators that produce up to 700,000 in. lbs. of torque at 3,000 psi.

MONARCH HYDRAULICS
AC/DC hydraulic power units; ergonomic height adjusted systems for industrial workstations.

MONNIER, INC.
The most important factor in the long life of any pneumatic tool or equipment is the quality of the compressed air in the system. Precision machined tolerances give Monnier’s airline filters, regulators, lubricators and accessories unsurpassed strength and quality.

NOSHOK, INC.
Pressure gauges; Temperature gauges; Stainless steel flow control

PEPPERL+FUCHS
Electical sensors including inductive, capacitive, photoelectric, ultrasonic, special applications, and intrinsically safe proximity type sensors.

P.Q. CONTROLS
Electronic, proportional single and dual axis joysticks, driver boards, self-leveling systems.

REGO CRYO-FLOW
Hydraulic flow control valves and check valves availablein brass, carbon steel and stainless steel.

RINEER HYDRAULICS
A range of fixed & variable displacement motors from 5 in3 to 250 in3; Starting & stall torques equal to 90-94%; Compact in size with horsepower ratings to 600.

ROTARY POWER
Low speed, high torque radial piston hydraulic motors to 1,700 horsepower.

SPRAGUE PRODUCTS
(A Curtiss-Wright Flow Products Company)
Air driven pumps for liquids to 33,000 psi; Gas boosters to 10,000 psi.

STAR HYDRAULICS
Hand & foot pumps; Single & two speed with pressure to 15,000 psi; Custom cylinders & rams.

STAUFF CORPORATION
Pipe, hose and tubing clamps to 30" diameter; high pressure ball valves from 1/4" to 2" rated to 6,000 psi; gauges and pressure test points.

THERMAL TRANSFER
Air to oil and shell and tube heat exchangers for industrial and mobile applications.

TOBUL ACCUMULATORS
Piston and bladder-type accumulators with capacity to 200 gallons andpressures to 10,000 psi.

VESCOR
Piston, vane pumps and motors; Directional, proportional, servo, pressure and flow control valves; NFPA hydraulic & pneumatic cylinders.

VICKERS CYLINDERS
(A division of Eaton Hydraulics)
Industrial tie rod cylinders, NFPA and custom with optional electrical position sensors.

VOITH
High perfomrance & extremely quiet internal gear pumps to over 100 GPM.

VON RUDEN
Rol-seal and axial vane hydraulic motors.

WANDFLUH OF AMERICA
On/off and proportional control valves with flows from .005 to 300 GPM; Zero leak solenoid valves and digital electronic products.

WILKES & McLEAN
Noise and hydraulic shock suppressors in line sizes from 3/8" to 3"; 3000 psi and 5000 psi models.

Vogel
Vogel is a large supplier of centralized lubricating devices and systems worldwide. Vogel covers all lines from industrial applications, mobile equipment, Near dry Machining and Spandau Coolant Pumps.